Kerio-tech Firewall6 Manual de usuario descargar pdf (Pagina 351)

23.6 Example of a more complex Kerio VPN conﬁguration

351

• Set the IP address of this interface (172.16.1.1) as a primary DNS server for the

WinRoute host’s interface connected to the LAN 1 local network. It is not necessary

to set DNS at the interface connected to LAN 2.

• Set the IP address 172.16.1.1 as a primary DNS server also for the other hosts.

4. Enable the VPN server and conﬁgure its SSL certiﬁcate (create a self-signed certiﬁcate if no

certiﬁcate provided by a certiﬁcation authority is available).

Note: The VPN network and Mask entries now include an automatically selected free sub-

net. Check whether this subnet does not collide with any other subnet in the headquarters

or in the ﬁlials. If it does, specify a free subnet.

Figure 23.49 The London ﬁlial oﬃce — VPN server conﬁguration

For a detailed description on the VPN server conﬁguration, refer to chapter 23.1.

5. Create an active endpoint of the VPN tunnel which will connect to the headquarters server

(newyork.company.com). Use the ﬁngerprint of the VPN server of the headquarters as a

speciﬁcation of the ﬁngerprint of the remote SSL certiﬁcate.

On the Advanced tab, select the Use custom routes only option and set routes to headquar-

ters’ local networks.

At this point, connection should be established (i.e. the tunnel should be created). If

connected successfully, the Connected status will be reported in the Adapter info column

for both ends of the tunnel. If the connection cannot be established, we recommend you

to check the conﬁguration of the traﬃc rules and test availability of the remote server — in

1 2 ... 346 347 348 349 350 351 352 353 354 355 356 ... 403 404

Sin comentarios

Kerio-tech Firewall6 Manual de usuario Pagina 351